Bar steel is considered to be all shapes of bars such as in round, flat, square, hexagonal and many more.

Depending on the cross-section, the bar steel is produced hot-rolled or forged. The large diameters are then usually stored already pre-turned or peeled. Also, smaller dimensions are often offered in bright finish with tight tolerances.

It is divided here into structural, case-hardening, quenched and tempered and nitriding steels.

Applications for these steels include mechanical engineering, gears, shafts, components for the automotive industry, bolts, screws, piston rods and much more.

Bar steel, alloyed case-hardening steels EN 10084/DIN 17210, certificate EN 10204/3.1 B
Stoff-Nr.Kurzname ENKurzname DINAbmessung
1.575214NiCr1414NiCr14rund15 - 550
1.591817CrN i6-615CrNi6rund14 - 450
1.592018CrNi818CrNi8rund25 - 300
1.652321NiCrMo221NiCrMo2rund20 - 80
1.658718CrNiMo 7-617CrNiMo6rund20 - 800
1.713116MnCr516MnCr5rund6 - 800
1.713116MnCr516MnCr5flach20*10 - 300*60
1.713116MnCr516MnCr54-kant20 - 200
1.714720MnCr520MnCr5rund15 - 800
Product request

Bar steel, unalloyed quenched and tempered steels EN 10083/17200, certificate EN 10204/3.1 B

Stoff-Nr.Kurzname ENKurzname DINAbmessung
1.116530Mn530Mn5rund45 - 235
1.1141C15ECk 15rund50 - 260
1.1191C45ECk 45rund40 - 600
1.1191C45ECk 45flach20*5 - 150*60
1.1191C45ECk 45breitflach160*20 - 500*10
1.1191C45ECk 454-kant20 - 300
1.1221C60ECk 60rund50 - 600
Product request
Bar steel, alloyed quenched and tempered steels EN 10083/DIN 17200, certificate EN 10204/3.1 B
Stoff-Nr.Kurzname ENKurzname DINAbmessung
1.512237MnSi537MnSi5rund30 - 350
1.658030CrNiMo830CrNiMo8rund10 - 800
1.658234CrNiMo634CrNiMo6rund13 - 800
1.695935NiCrMoV12.535NiCrMoV12.5rund65 - 180
1.703334Cr434Cr4rund12 - 200
1.703541Cr441Cr4rund16 - 180
1.721825CrMo425CrMo4rund4 - 750
1.722034CrMo434CrMo4rund16 - 600
1.722542CrMo442CrMo4rund14 - 1050
1.722850CrMo450CrMo4rund35 - 400
1.770730CrMoV930CrMoV9rund25 - 800
1.815951CrV451CrV4rund5 - 750
Product request

Bar steel, heat-resistant structural steels EN 10273/DIN 17243, certificate EN 10204/3.1 B

Stoff-Nr.Kurzname ENKurzname DINAbmessung
1.0460P250GHC 22.8rund80  - 470
1.541516Mo315Mo3rund25 - 460
1.733513CrMo 4-513CrMo44rund40 - 460
1.738010CrMo 9-1010CrMo9.10rund40 - 460
1.770921CrMoV5.721CrMoV5.7rund20 - 200
Product request

Bar steel, nitriding steels EN 10085/DIN 17211, certificate EN 10204/3.1 B

Stoff-Nr.Kurzname ENKurzname DINAbmessung
1.773514CrMoV6.914CrMoV6.9rund40 - 550
1.851931CrMoV931CrMoV9rund20  -800
1.852115CrMoV5.915CrMoV5.9rund40 - 450
1.855034CrAlNi734CrAlNi7rund20 - 750
Product request